The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-360-9159, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-360-9159 |
| Primary Part Number | A78325-6H-6P |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Extended Washer Thickness | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN |
| Fastener Length | 1.019 INCHES MINIMUM AND 1.049 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN |
| Thread Length | 0.634 INCHES MINIMUM AND 0.684 INCHES MAXIMUM IN |
| Hole Configuration Style | SPLINE |
| Material Document and Classification | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.448 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Grip Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | NICKEL ALLOY 718 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A78325-6H-6P | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| A78325-6H-6P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-360-9159 is a Bolt,close Tolerance, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-360-9159 has 1 manufacturer part number on file: A78325-6H-6P (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for A78325-6H-6P: Extended Washer Thickness: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN; Fastener Length: 1.019 INCHES MINIMUM AND 1.049 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.