The Bolt,shear, cataloged under National Stock Number 5306-01-349-4180, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies Llc Dba PB Fasteners Div PB Fasteners. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-349-4180 |
| Primary Part Number | PBF1478-4H14 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Head Height | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Fastener Length | 1.272 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Thread Length | 0.412 INCHES NOMINAL IN |
| Hole Configuration Style | DOUBLE HEXAGON LONGITUDINAL HOLE |
| Material Document and Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN |
| Width Between Flats | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PBF1478-4H14 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VCC0090-4H14 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| 84725-4H14 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| GB511GF4H14 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5306-01-349-4180 is a Bolt,shear, manufactured by Sps Technologies Llc Dba PB Fasteners Div PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-349-4180 has 3 manufacturer part numbers on file: PBF1478-4H14 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), VCC0090-4H14 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), 84725-4H14 (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for PBF1478-4H14: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Head Height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; Fastener Length: 1.272 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.