The Bolt,shear, cataloged under National Stock Number 5306-01-348-7087, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 10 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-348-7087 |
| Primary Part Number | 123711-4H14 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Extended Washer Thickness | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 1.306 INCHES MINIMUM AND 1.336 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Thread Length | 0.446 INCHES NOMINAL IN |
| Hole Configuration Style | DOUBLE HEXAGON LONGITUDINAL HOLE |
| Material Document and Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.318 INCHES NOMINAL IN |
| Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 123711-4H14 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| AIC1655-4H14 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| 03A100-4H14 | Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems (USA) |
| PBF1422-4H14 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| MB211-4H14 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| VCG0017-4H14 | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| SII1185-4H14 | Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries (USA) |
| MB211-4H14 | Hi-Shear Corporation (USA) |
| X385-4H14 | Huck International, Inc (USA) |
| 03A100-4H14 | Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems (USA) |
| Reference | Meaning |
|---|---|
| X385-4H14 | 3/9 Design control — primary reference U.S. Government activity |
| VS3320-4H14 | 5/2 Secondary reference U.S. Government activity |
| VS3320-4H14 | 5/9 Secondary reference Voi-Shan/chatsworth Div of Vsi Corp Sub of Fairchild Industries Inc |
NSN 5306-01-348-7087 is a Bolt,shear, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-348-7087 has 10 manufacturer part numbers on file: 123711-4H14 (Sps Technologies, Llc Dba PB Fasteners), AIC1655-4H14 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), 03A100-4H14 (Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems), PBF1422-4H14 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), MB211-4H14 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc) and 5 more.
Key specifications for 123711-4H14: Extended Washer Thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Fastener Length: 1.306 INCHES MINIMUM AND 1.336 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.