The Bolt,shear, cataloged under National Stock Number 5306-01-340-9054, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-340-9054 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Head Height | 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN |
| Fastener Length | 4.485 INCHES MINIMUM AND 4.515 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Thread Length | 0.881 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.677 INCHES MINIMUM AND 3.697 INCHES MAXIMUM IN |
| Width Between Flats | 0.637 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN |
| Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30MT8T59 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-340-9054 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-340-9054: Extended Washer Thickness: 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Head Height: 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN; Fastener Length: 4.485 INCHES MINIMUM AND 4.515 INCHES MAXIMUM IN; Extended Washer Diameter: 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.