The Bolt,shear, cataloged under National Stock Number 5306-01-338-4002, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-338-4002 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN |
| Fastener Length | 1.377 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.454 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN |
| Hole Configuration Style | HEXAGON CORNERS |
| Material Document and Classification | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS6306 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN |
| Width Between Flats | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN |
| Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | IRON ALLOY 660 OVERALL |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.209 INCHES NOMINAL FIRST HOLE IN |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6306-15DH | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-338-4002 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-338-4002: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN; Fastener Length: 1.377 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.