The Bolt,machine, cataloged under National Stock Number 5306-01-318-8626, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-318-8626 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN |
| Fastener Length | 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.886 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN |
| Criticality Code Justification | FEAT |
| Material Document and Classification | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 304 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| MS35308-5/16-24X1IN. | 5/1 Secondary reference U.S. Government activity |
| MS35308-334-DRILLED-HEAD | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-318-8626 is a Bolt,machine, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-318-8626: Head Height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN; Fastener Length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.886 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.