The Bolt,shear, cataloged under National Stock Number 5306-01-313-1745, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-313-1745 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 2.017 INCHES MINIMUM AND 2.047 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-416 TY 2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN |
| Thread Length | 0.445 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM21134 | 5/1 Secondary reference U.S. Government activity |
| MS21134-04025 | 5/9 Secondary reference U.S. Government activity |
| MS21134-04025 | 3/2 Design control — primary reference U.S. Government activity |
| 5306PL2222030 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5306-01-313-1745 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
3 possible matches (shared part number, not a government interchangeability claim): 5306-01-313-1746, 5306-01-313-1761, 5306-01-313-1764. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-01-313-1745: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.