The Bolt,u, cataloged under National Stock Number 5306-01-309-7038, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-309-7038 |
| Primary Part Number | 1419M17P10 |
| Item Name | Bolt,u |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Inside Distance Between Shanks | 3.110 INCHES MINIMUM AND 3.130 INCHES MAXIMUM IN |
| Thread Length | 2.000 INCHES NOMINAL IN |
| Distance From Inside Center of Bend to Bolt End | 4.120 INCHES NOMINAL IN |
| Style Designator | ROUND BEND |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1419M17P10 PRIMARY | General Electric Company (USA) |
NSN 5306-01-309-7038 is a Bolt,u, manufactured by General Electric Company, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-309-7038 has 1 manufacturer part number on file: 1419M17P10 (General Electric Company).
Key specifications for 1419M17P10: Inside Distance Between Shanks: 3.110 INCHES MINIMUM AND 3.130 INCHES MAXIMUM IN; Thread Length: 2.000 INCHES NOMINAL IN; Distance From Inside Center of Bend to Bolt End: 4.120 INCHES NOMINAL IN; Style Designator: ROUND BEND. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.