PartsTable TECHNICAL DATA SHEET
NSN 5306-01-297-7525Government record, cited

Bolt, Machine5306-01-297-7525

NSN 5306-01-297-7525 · NIIN 012977525 · Part number BACB30ST7-39
Sps Technologies, Llc Dba PB Fasteners · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 56878
Government record, cited
NSN 5306-01-297-7525 — this item is cataloged by the U.S. Government under National Stock Number 5306-01-297-7525. Manufacturer of record part number: BACB30ST7-39.
Also searched as  5306-01-297-7525 · 5306012977525 · NIIN 012977525 · 01-297-7525 · FSC 5306 Bolts · CAGE 56878 · BACB30ST7-39
Nearby stock numbers  ·
Features
  • Bolt,machine — FSC 5306
  • Head Height: 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
  • Fastener Length: 3.301 INCHES MINIMUM AND 3.331 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
  • Thread Length: 0.853 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER
Identification
  • NSN: 5306-01-297-7525
  • NIIN: 012977525
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: BACB30ST7-39
  • Manufacturer: Sps Technologies, Llc Dba PB Fasteners
General Description

The Bolt,machine, cataloged under National Stock Number 5306-01-297-7525, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-01-297-7525
Primary Part NumberBACB30ST7-39
Item NameBolt,machine
FSC / FSG5306 / 53 — Bolts
ManufacturerSps Technologies, Llc Dba PB Fasteners
StatusACTIVE
Head Height0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
Fastener Length3.301 INCHES MINIMUM AND 3.331 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
Thread Length0.853 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER
Hardness Rating35.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM STAND-OFF
Hardness Rating48.0 ROCKWELL C MINIMUM SPRING
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 5673 ASSN STD SINGLE MATERIAL RESPONSE SPRING
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
Material Document and ClassificationMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE FASTENER
Nominal Thread Diameter0.438 INCHES IN
Features ProvidedDRY FILM LUBRICANT
Head StyleDISHED HEXAGON
Thread DirectionRIGHT-HAND
Width Between Flats0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
Locking FeatureRETAINER THREADS
Surface TreatmentPASSIVATE STAND-OFF
Surface TreatmentPASSIVATE SPRING
Surface TreatmentCADMIUM AND CHROMATE FASTENER
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch20
MaterialSTEEL COMP 631 SPRING
MaterialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 FASTENER
MaterialSTEEL COMP 630 STAND-OFF
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
BACB30ST7-39 Sps Technologies, Llc Dba PB Fasteners (USA)
BACB30ST7-39 Space-Lok, Inc. Dba Space-Lok Inc Div Space-Lok (USA)
Reference documents
ReferenceMeaning
BACB30ST7-39 5/9 Secondary reference
The Boeing Company
BACB30ST7-39 3/2 Design control — primary reference
U.S. Government activity
BACB30ST7-39 5/2 Secondary reference
U.S. Government activity
BACB30ST7-39 5/9 Secondary reference
U.S. Government activity
BACB30ST7-39 5/2 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276
5306-00-001-1276 · Item name not on file
5306-00-001-1949
5306-00-001-1949 · Item name not on file
5306-00-001-1988
5306-00-001-1988 · Item name not on file
5306-00-001-1989
5306-00-001-1989 · Item name not on file
5306-00-001-1990
5306-00-001-1990 · Item name not on file
5306-00-001-1991
5306-00-001-1991 · Item name not on file
5306-00-001-1993
BOLT,SHEAR
5306-00-001-2017
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-01-297-7525?

NSN 5306-01-297-7525 is a Bolt,machine, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-01-297-7525?

NSN 5306-01-297-7525 has 2 manufacturer part numbers on file: BACB30ST7-39 (Sps Technologies, Llc Dba PB Fasteners), BACB30ST7-39 (Space-Lok, Inc. Dba Space-Lok Inc Div Space-Lok).

What are the specifications of BACB30ST7-39?

Key specifications for BACB30ST7-39: Head Height: 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN; Fastener Length: 3.301 INCHES MINIMUM AND 3.331 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5306-01-297-7525 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com