The Bolt,shear, cataloged under National Stock Number 5306-01-285-8884, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-285-8884 |
| Primary Part Number | 300-337154 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Head Height | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Fastener Length | 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.301 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM SECOND HOLE IN |
| Shank Unthreaded Hole Diameter | 0.082 INCHES NOMINAL FIRST HOLE IN |
| Material Document and Classification | MIL-S-5000,COND. C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.438 INCHES NOMINAL IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM FIRST HOLE IN |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.623 INCHES MINIMUM AND 0.653 INCHES MAXIMUM SECOND HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 300-337154 PRIMARY | Naval Inventory Control Point Mechanicsburg (USA) |
NSN 5306-01-285-8884 is a Bolt,shear, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-285-8884 has 1 manufacturer part number on file: 300-337154 (Naval Inventory Control Point Mechanicsburg).
Key specifications for 300-337154: Head Height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN; Fastener Length: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.301 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.