PartsTable TECHNICAL DATA SHEET
NSN 5306-01-265-6120Government record, cited

Bolt, Shear5306-01-265-6120

NSN 5306-01-265-6120 · NIIN 012656120 · Part number 180A435-009
General Electric Company · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 01289
Government record, cited
NSN 5306-01-265-6120 — this item is cataloged by the U.S. Government under National Stock Number 5306-01-265-6120. Manufacturer of record part number: 180A435-009.
Also searched as  5306-01-265-6120 · 5306012656120 · NIIN 012656120 · 01-265-6120 · FSC 5306 Bolts · CAGE 01289 · 180A435-009 · LWB22-14-149 · 180A435-010
Nearby stock numbers  ·
Features
  • Bolt,shear — FSC 5306
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Extended Washer Thickness: 0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
  • Head Height: 0.798 INCHES MINIMUM AND 0.818 INCHES MAXIMUM IN
  • Fastener Length: 10.472 INCHES MINIMUM AND 10.502 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Extended Washer Diameter: 1.428 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN
Identification
  • NSN: 5306-01-265-6120
  • NIIN: 012656120
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 180A435-009
  • Manufacturer: General Electric Company
General Description

The Bolt,shear, cataloged under National Stock Number 5306-01-265-6120, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-01-265-6120
Primary Part Number180A435-009
Item NameBolt,shear
FSC / FSG5306 / 53 — Bolts
ManufacturerGeneral Electric Company
StatusACTIVE
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Extended Washer Thickness0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
Head Height0.798 INCHES MINIMUM AND 0.818 INCHES MAXIMUM IN
Fastener Length10.472 INCHES MINIMUM AND 10.502 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Extended Washer Diameter1.428 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN
Thread Length1.150 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
Hardness Rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.875 INCHES IN
Head StyleDOUBLE HEXAGON W/HOLE
Thread DirectionRIGHT-HAND
Grip Length9.302 INCHES MINIMUM AND 9.322 INCHES MAXIMUM IN
Width Between Flats0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
Grip Diameter0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength220000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch14
MaterialSTEEL COMP H11 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
180A435-009 PRIMARY General Electric Company (USA)
Reference documents
ReferenceMeaning
LWB22-14-149 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
180A435-010 C/1 Advisory reference — outside the item-of-supply concept
General Electric Company
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276
5306-00-001-1276 · Item name not on file
5306-00-001-1949
5306-00-001-1949 · Item name not on file
5306-00-001-1988
5306-00-001-1988 · Item name not on file
5306-00-001-1989
5306-00-001-1989 · Item name not on file
5306-00-001-1990
5306-00-001-1990 · Item name not on file
5306-00-001-1991
5306-00-001-1991 · Item name not on file
5306-00-001-1993
BOLT,SHEAR
5306-00-001-2017
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-01-265-6120?

NSN 5306-01-265-6120 is a Bolt,shear, manufactured by General Electric Company, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-01-265-6120?

NSN 5306-01-265-6120 has 1 manufacturer part number on file: 180A435-009 (General Electric Company).

What are the specifications of 180A435-009?

Key specifications for 180A435-009: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN; Head Height: 0.798 INCHES MINIMUM AND 0.818 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5306-01-265-6120 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com