The Bolt,shear, cataloged under National Stock Number 5306-01-255-3065, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-255-3065 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| Fastener Length | 1.638 INCHES MINIMUM AND 1.668 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 11,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.528 INCHES NOMINAL IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON LONGITUDINAL HOLE |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN |
| Width Between Flats | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6208-18DH | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-255-3065 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-255-3065: Head Height: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN; Fastener Length: 1.638 INCHES MINIMUM AND 1.668 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 11,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.528 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.