The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-246-9801, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-246-9801 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Fastener Length | 0.903 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.323 INCHES NOMINAL IN |
| Hole Configuration Style | HEXAGON LONGITUDINAL HOLE |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | UNDERCUT HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS6203 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Width Between Flats | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Diameter | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6203-7H | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-246-9801 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-246-9801: Head Height: 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Fastener Length: 0.903 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.323 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.