The Bolt,eye, cataloged under National Stock Number 5306-01-245-5065, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-245-5065 |
| Item Name | Bolt,eye |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Eye Stock Diameter | 0.500 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-Z-325 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.540 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN |
| Shank Length | 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Distance From Center of Eye to Shank End | 2.060 INCHES NOMINAL IN |
| Shoulder Diameter | 1.120 INCHES NOMINAL IN |
| Shoulder Thickness | 0.180 INCHES NOMINAL IN |
| Surface Treatment | ZINC OVERALL |
| Eye Inside Diameter | 1.250 INCHES NOMINAL IN |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 11 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Eye Outside Width | 2.250 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 301360-1 | 3/9 Design control — primary reference Ducommun Labarge Technologies, Inc Dba Ducommun Labarge Technologies, Inc |
NSN 5306-01-245-5065 is a Bolt,eye, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-245-5065: Eye Stock Diameter: 0.500 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-Z-325 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.540 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN; Shank Length: 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.