The Bolt,machine, cataloged under National Stock Number 5306-01-241-1510, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-241-1510 |
| Primary Part Number | AN14CH40A |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Hole Quantity | 1 |
| Thread Length | 1.218 INCHES MINIMUM AND 1.297 INCHES MAXIMUM IN |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Grip Length | 2.922 INCHES MINIMUM AND 2.954 INCHES MAXIMUM IN |
| Fastener Length | 4.172 INCHES MINIMUM AND 4.219 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.875 INCHES IN |
| Head Height | 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Material | STEEL COMP 431 OVERALL |
| Thread Class | 3A A |
| Features Provided | FINISHED HEAD |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Thread Quantity Per Inch | 14 |
| Thread Series Designator | UNF |
| Hole Configuration Style | HEXAGON FLATS |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Head Style | HEXAGON |
| Hole Type | DRILLED |
| Width Between Flats | 1.240 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN14CH40A | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| NASM3 THRU 20 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
NSN 5306-01-241-1510 is a Bolt,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-01-241-1510 has 2 cross-referenced part numbers: AN14CH40A (Aeronautical Standards Group Dept of Navy and Air Force), NASM3 THRU 20 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use).
There are 3 known substitutes for 5306-01-241-1510: 5306-00-584-7897, 5306-00-590-2700, 5306-00-638-8397. Verify interchangeability with system specifications before substitution.
Key specifications for AN14CH40A: Hole Quantity: 1; Thread Length: 1.218 INCHES MINIMUM AND 1.297 INCHES MAXIMUM IN; Hole Diameter: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN; Surface Treatment: PASSIVATE OVERALL. 22 total characteristics are documented in the Federal Logistics Information System.