The Bolt,u, cataloged under National Stock Number 5306-01-219-7152, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-219-7152 |
| Item Name | Bolt,u |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Inside Distance Between Shanks | 1.240 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN |
| Distance From Inside Center of Bend to Bolt End | 1.350 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN |
| Style Designator | ROUND BEND |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 431 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACC10Y20P12C | 3/2 Design control — primary reference U.S. Government activity |
| BACC10Y20P12C | 5/9 Secondary reference Umpco, Inc. Dba Umpco Inc |
| BACC10Y20P12C | 5/9 Secondary reference Mamco Mfg Co Inc |
NSN 5306-01-219-7152 is a Bolt,u, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-219-7152: Inside Distance Between Shanks: 1.240 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN; Distance From Inside Center of Bend to Bolt End: 1.350 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.