The Bolt,internal Wrenching, cataloged under National Stock Number 5306-01-215-2500, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-215-2500 |
| Primary Part Number | 9509M57P01 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Head Height | 0.015 INCHES MAXIMUM IN |
| Fastener Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN |
| Thread Length | 0.598 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN |
| Criticality Code Justification | FEAT |
| Spline Major Diameter | 0.178 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FILLISTER COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Internal Drive Style | TORX |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Part Number | Manufacturer |
|---|---|
| 9509M57P01 PRIMARY | General Electric Company (USA) |
NSN 5306-01-215-2500 is a Bolt,internal Wrenching, manufactured by General Electric Company, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-215-2500 has 1 manufacturer part number on file: 9509M57P01 (General Electric Company).
Key specifications for 9509M57P01: Surface Finish: 32.0 MICROINCHES THREADS; Head Height: 0.015 INCHES MAXIMUM IN; Fastener Length: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN; Thread Length: 0.598 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.