The Bolt,shear, cataloged under National Stock Number 5306-01-197-1374, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-197-1374 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| Head Height | 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN |
| Fastener Length | 1.838 INCHES MINIMUM AND 1.868 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN |
| Thread Length | 0.828 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.644 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21297H08016 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-197-1374 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-197-1374: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN; Head Height: 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.