The Bolt,shear, cataloged under National Stock Number 5306-01-196-8072, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-196-8072 |
| Primary Part Number | MB156-6H24 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Extended Washer Thickness | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN |
| Fastener Length | 2.099 INCHES MINIMUM AND 2.129 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN |
| Thread Length | 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN |
| Hole Configuration Style | SPLINE |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| Width Between Flats | 0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN |
| Grip Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ST3M753-6H24 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| MB156-6H24 PRIMARY | Hi-Shear Corporation (USA) |
| VFK600-6H24 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| MB156-6H24 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| PBF1267-6H24 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| AIC763-6H24 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| VS3190-6H24 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| ST3M753-6H24 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| S343-6H24 | 5/9 Secondary reference U.S. Government activity |
| VS3190-6H24 | 5/9 Secondary reference U.S. Government activity |
| S343-6H24 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| ST3M753-6H24 | 5/2 Secondary reference U.S. Government activity |
| ST3M753-6H24 | 5/9 Secondary reference Am Multigraphics Div of Am Intl Inc |
| 122897-6H24 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-196-8072 is a Bolt,shear, manufactured by Hi-Shear Corporation, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-196-8072 has 6 manufacturer part numbers on file: ST3M753-6H24 (Sps Technologies, Llc Dba PB Fasteners), MB156-6H24 (Hi-Shear Corporation), VFK600-6H24 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), MB156-6H24 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), PBF1267-6H24 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners) and 1 more.
Key specifications for MB156-6H24: Extended Washer Thickness: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN; Fastener Length: 2.099 INCHES MINIMUM AND 2.129 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.