The Bolt,shear, cataloged under National Stock Number 5306-01-196-5568, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-196-5568 |
| Primary Part Number | AIC763-7H22 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Extended Washer Thickness | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Head Height | 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN |
| Fastener Length | 2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN |
| Thread Length | 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN |
| Hole Configuration Style | SPLINE |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.437 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN |
| Grip Diameter | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP XM-13 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AIC763-7H22 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| MB156-7H22 PRIMARY | Hi-Shear Corporation (USA) |
| 11829-7H22 | Reid Products Inc. Dba Reid Products Inc (USA) |
| VFK600-7H22 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| PBF1267-7H22 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| MB156-7H22 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| ST3M753-7H22 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| S343-7H22 | 5/9 Secondary reference U.S. Government activity |
| 122897-7H22 | 3/2 Design control — primary reference U.S. Government activity |
| S343-7H22 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| VS3190-7H22 | 5/9 Secondary reference U.S. Government activity |
| VS3190-7H22 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
NSN 5306-01-196-5568 is a Bolt,shear, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-196-5568 has 6 manufacturer part numbers on file: AIC763-7H22 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), MB156-7H22 (Hi-Shear Corporation), 11829-7H22 (Reid Products Inc. Dba Reid Products Inc), VFK600-7H22 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), PBF1267-7H22 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners) and 1 more.
Key specifications for AIC763-7H22: Extended Washer Thickness: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Head Height: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN; Fastener Length: 2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.