The Bolt,square Neck, cataloged under National Stock Number 5306-01-191-0392, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-191-0392 |
| Item Name | Bolt,square Neck |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Neck Length | 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Head Height | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Fastener Length | 5.400 INCHES MINIMUM AND 5.580 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| Material Document and Classification | ASTM A307 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | BUTTON |
| Nondefinitive Spec/std Data | 1 TYPE AND 1 CLASS AND A STYLE |
| Neck Width | 0.492 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Material | STEEL OVERALL |
| Head Diameter | 1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35751-138 | 3/2 Design control — primary reference U.S. Government activity |
| MS35751-138 | 5/9 Secondary reference U.S. Government activity |
| FF-B-584 | 4/1 Identification reference U.S. Government activity |
NSN 5306-01-191-0392 is a Bolt,square Neck, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-191-0392: Neck Length: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN; Head Height: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN; Fastener Length: 5.400 INCHES MINIMUM AND 5.580 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.