The Bolt,internal Wrenching, cataloged under National Stock Number 5306-01-173-3525, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-173-3525 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Head Height | 0.375 INCHES NOMINAL IN |
| Fastener Length | 5.673 INCHES MINIMUM AND 5.703 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.663 INCHES MINIMUM AND 1.613 INCHES MAXIMUM IN |
| Hardness Rating | 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | TEE NO. 2 |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 8735 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20006-80 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-173-3525 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-173-3525: Width Across Flats: 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN; Head Height: 0.375 INCHES NOMINAL IN; Fastener Length: 5.673 INCHES MINIMUM AND 5.703 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.