The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-169-7232, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-169-7232 |
| Primary Part Number | 3M1046-10-22 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Head Height | 0.350 INCHES NOMINAL IN |
| Fastener Length | 2.271 INCHES MINIMUM AND 2.318 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.906 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN |
| Hole Configuration Style | SPLINE |
| Material Document and Classification | AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | SPLINE DRIVE SHEAR HEAD |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Width Between Flats | 0.970 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN |
| Grip Diameter | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 145000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | COBALT COMP MP-35-N OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.017 INCHES MINIMUM AND 2.074 INCHES MAXIMUM FIRST HOLE IN |
| Hole Type | DRILLED |
| Hole Diameter | 0.065 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PBF1426-10-22 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| 81921-10-22 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| 3M1046-10-22 PRIMARY | The Boeing Company Div Defense (USA) |
| Reference | Meaning |
|---|---|
| 3M1046-10-22 | 5/9 Secondary reference Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| 10116075 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5306-01-169-7232 is a Bolt,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-169-7232 has 3 manufacturer part numbers on file: PBF1426-10-22 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), 81921-10-22 (Sps Technologies, Llc Dba PB Fasteners), 3M1046-10-22 (The Boeing Company Div Defense).
Key specifications for 3M1046-10-22: Head Height: 0.350 INCHES NOMINAL IN; Fastener Length: 2.271 INCHES MINIMUM AND 2.318 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.906 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.