The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-165-5592, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-165-5592 |
| Primary Part Number | MB154-5D64 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Head Height | 0.187 INCHES NOMINAL IN |
| Fastener Length | 4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | SPLINE DRIVE SHEAR HEAD |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.415 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN |
| Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 4.257 INCHES MINIMUM AND 4.267 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MB154-5D64 PRIMARY | Hi-Shear Corporation (USA) |
| PBF1265-5D64 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VCG0001-5D64 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| AIC687-5D64 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| MB154-5D64 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| VS3174-5D64 | 5/9 Secondary reference U.S. Government activity |
| VS3174-5D64 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| 10116054 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| S406-5D64 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| ST3M744-5D64 | 5/9 Secondary reference U.S. Government activity |
| ST3M744-5D64 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| 122895-5D64 | 3/2 Design control — primary reference U.S. Government activity |
| S406-5D64 | 5/9 Secondary reference U.S. Government activity |
| ST3M744-5D64 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
NSN 5306-01-165-5592 is a Bolt,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-165-5592 has 5 manufacturer part numbers on file: MB154-5D64 (Hi-Shear Corporation), PBF1265-5D64 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), VCG0001-5D64 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), AIC687-5D64 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), MB154-5D64 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc).
Key specifications for MB154-5D64: Head Height: 0.187 INCHES NOMINAL IN; Fastener Length: 4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.