The Bolt,shear, cataloged under National Stock Number 5306-01-163-5769, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is M.s. Aerospace Inc. Dba Ms Aerospace Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-163-5769 |
| Primary Part Number | MS21250-08058 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | M.s. Aerospace Inc. Dba Ms Aerospace Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Head Height | 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN |
| Fastener Length | 4.403 INCHES MINIMUM AND 4.423 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Thread Length | 0.768 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN |
| Width Between Flats | 0.562 INCHES NOMINAL IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Part Number | Manufacturer |
|---|---|
| MS21250-08058 | M.s. Aerospace Inc. Dba Ms Aerospace Inc (USA) |
| MS21250-08058 | Acufast Aircraft Products (USA) |
| MS21250-08058 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| MS21250-08058 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| MS21250-08058 | 3/2 Design control — primary reference U.S. Government activity |
| MS21250-08058 | 5/2 Secondary reference U.S. Government activity |
| CIPRDMS21250-08058 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
NSN 5306-01-163-5769 is a Bolt,shear, manufactured by M.s. Aerospace Inc. Dba Ms Aerospace Inc, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-163-5769 has 4 manufacturer part numbers on file: MS21250-08058 (M.s. Aerospace Inc. Dba Ms Aerospace Inc), MS21250-08058 (Acufast Aircraft Products), MS21250-08058 (Sps Technologies, Llc Dba PB Fasteners), MS21250-08058 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners).
Key specifications for MS21250-08058: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Head Height: 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.