The Bolt,machine, cataloged under National Stock Number 5306-01-133-2173, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-133-2173 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.150 INCHES MINIMUM AND 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM0.163 INCHES MAXIMUM IN |
| Fastener Length | 0.470 INCHES MINIMUM AND 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 TY 1,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 TY 1,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Special Test Features | SPECIAL QUALITY CONTROL TESTINGSPECIAL QUALITY CONTROL TESTING |
| Thread Length | 0.345 INCHES MINIMUM AND 0.345 INCHES MINIMUM AND 0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN |
| Criticality Code Justification | ZZZYZZZY |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALLAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES0.250 INCHES IN |
| Features Provided | FINISHED HEADFINISHED HEAD |
| Head Style | HEXAGONHEXAGON |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Width Between Flats | 0.428 INCHES MINIMUM AND 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM0.438 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALLPASSIVATE OVERALL |
| Thread Class | 2A2A |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 2020 |
| Material | STEEL COMP 304 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC) |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATIONAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| N24P21008 | 3/9 Design control — primary reference Bechtel Technical Services Inc Machinery Apparatus Opn |
NSN 5306-01-133-2173 is a Bolt,machine, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-01-618-0101. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-01-133-2173: Head Height: 0.150 INCHES MINIMUM AND 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM0.163 INCHES MAXIMUM IN; Fastener Length: 0.470 INCHES MINIMUM AND 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 TY 1,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 TY 1,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Special Test Features: SPECIAL QUALITY CONTROL TESTINGSPECIAL QUALITY CONTROL TESTING. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.