The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-133-0179, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-133-0179 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.501 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Fastener Length | 4.232 INCHES MINIMUM AND 4.252 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.833 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN |
| Criticality Code Justification | FEAT |
| Nominal Thread Diameter | 1.000 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.000 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN |
| Width Between Flats | 1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN |
| Grip Diameter | 0.9982 INCHES MINIMUM AND 0.9991 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 12 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 4.075 INCHES MINIMUM AND 4.105 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| AS194-16-48 | 5/2 Secondary reference U.S. Government activity |
| MS27576-16-48 | 3/2 Design control — primary reference U.S. Government activity |
| MS27576-16-48 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-133-0179 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-133-0179: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.501 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Fastener Length: 4.232 INCHES MINIMUM AND 4.252 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.