PartsTable TECHNICAL DATA SHEET
NSN 5306-01-130-7297Government record, cited

Bolt, Shear5306-01-130-7297

NSN 5306-01-130-7297 · NIIN 011307297 · Part number MB186-4H4
Hi-Shear Corporation · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5306-01-130-7297 — this item is cataloged by the U.S. Government under National Stock Number 5306-01-130-7297. Manufacturer of record part number: MB186-4H4.
Also searched as  5306-01-130-7297 · 5306011307297 · NIIN 011307297 · 01-130-7297 · FSC 5306 Bolts · CAGE 73197 · MB186-4H4 · AIC515-4H4 · LWB22D-4H4 · H381-4H4
Nearby stock numbers  ·
Features
  • Bolt,shear — FSC 5306
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Extended Washer Thickness: 0.069 INCHES NOMINAL IN
  • Head Height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
  • Fastener Length: 0.647 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
  • Extended Washer Diameter: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
Identification
  • NSN: 5306-01-130-7297
  • NIIN: 011307297
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: MB186-4H4
  • Manufacturer: Hi-Shear Corporation
General Description

The Bolt,shear, cataloged under National Stock Number 5306-01-130-7297, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 8 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-01-130-7297
Primary Part NumberMB186-4H4
Item NameBolt,shear
FSC / FSG5306 / 53 — Bolts
ManufacturerHi-Shear Corporation
StatusACTIVE
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Extended Washer Thickness0.069 INCHES NOMINAL IN
Head Height0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
Fastener Length0.647 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationNAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Extended Washer Diameter0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
Thread Length0.387 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
Hardness Rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Hole Configuration StyleDOUBLE HEXAGON LONGITUDINAL HOLE
Material Document and ClassificationAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleDOUBLE HEXAGON W/HOLE
Thread DirectionRIGHT-HAND
Grip Length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
Width Between Flats0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
Grip Diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OR CADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength220000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP H11 OVERALL
Hole Quantity4
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Hole TypeDRILLED
Hole Diameter0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
MB186-4H4 Hi-Shear Corporation (USA)
MB186-4H4 Fairchild Fasteners Europe - Vsd Gmbh (DEU)
AIC515-4H4 Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA)
GB511W4H4 Sps Technologies, Llc Dba PB Fasteners (USA)
VS3070F4H4 Fairchild Fasteners Europe - Vsd Gmbh (DEU)
VEP220121-4VH4 Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA)
MB186-4H4 Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN)
PBF1079-4H4 Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA)
Reference documents
ReferenceMeaning
LWB22D-4H4 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
H381-4H4 5/9 Secondary reference
U.S. Government activity
VS3070F4H4 5/2 Secondary reference
U.S. Government activity
GB511W4H4 7/2 Vendor item drawing reference
Northrop Grumman Systems Corporation
H381-4H4 C/1 Advisory reference — outside the item-of-supply concept
Huck International, Inc
BM3315-4H4 5/9 Secondary reference
U.S. Government activity
BM3315-4H4 C/1 Advisory reference — outside the item-of-supply concept
Huck International, Inc
LWB22D-4H4 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276
5306-00-001-1276 · Item name not on file
5306-00-001-1949
5306-00-001-1949 · Item name not on file
5306-00-001-1988
5306-00-001-1988 · Item name not on file
5306-00-001-1989
5306-00-001-1989 · Item name not on file
5306-00-001-1990
5306-00-001-1990 · Item name not on file
5306-00-001-1991
5306-00-001-1991 · Item name not on file
5306-00-001-1993
BOLT,SHEAR
5306-00-001-2017
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-01-130-7297?

NSN 5306-01-130-7297 is a Bolt,shear, manufactured by Hi-Shear Corporation, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-01-130-7297?

NSN 5306-01-130-7297 has 8 manufacturer part numbers on file: MB186-4H4 (Hi-Shear Corporation), MB186-4H4 (Fairchild Fasteners Europe - Vsd Gmbh), AIC515-4H4 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), GB511W4H4 (Sps Technologies, Llc Dba PB Fasteners), VS3070F4H4 (Fairchild Fasteners Europe - Vsd Gmbh) and 3 more.

What are the specifications of MB186-4H4?

Key specifications for MB186-4H4: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.069 INCHES NOMINAL IN; Head Height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5306-01-130-7297 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com