The Bolt,shear, cataloged under National Stock Number 5306-01-120-5115, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-120-5115 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.092 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN |
| Head Height | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Fastener Length | 2.663 INCHES MINIMUM AND 2.693 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD |
| Surface Treatment Document and Classification | MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE GRIP |
| Surface Treatment Document and Classification | MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE THREADS |
| Surface Treatment Document and Classification | TT-E-489 FED SPEC SINGLE TREATMENT RESPONSE TOP OF HEAD |
| Extended Washer Diameter | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Thread Length | 0.903 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.644 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE THREADS |
| Surface Treatment | CADMIUM AND CHROMATE GRIP |
| Surface Treatment | CADMIUM AND CHROMATE BEARING SURFACE OF HEAD |
| Surface Treatment | ENAMEL TOP OF HEAD |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14163-08028 | 2/2 Government specification standardization U.S. Government activity |
| 10115758 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5306-01-120-5115 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-120-5115: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.092 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN; Head Height: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.