The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-119-1980, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-119-1980 |
| Primary Part Number | 9146M65P07 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Head Height | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Fastener Length | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN |
| Distance From Centerline to Flat | 0.110 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Thread Length | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN |
| Grip Diameter | 0.2644 INCHES MINIMUM AND 0.2646 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9146M65P07 PRIMARY | General Electric Company (USA) |
NSN 5306-01-119-1980 is a Bolt,close Tolerance, manufactured by General Electric Company, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-119-1980 has 1 manufacturer part number on file: 9146M65P07 (General Electric Company).
Key specifications for 9146M65P07: Head Height: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN; Fastener Length: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN; Distance From Centerline to Flat: 0.110 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN; Thread Length: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.