The Bolt,machine, cataloged under National Stock Number 5306-01-113-9731, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-113-9731 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES THREADS |
| Head Height | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN |
| Fastener Length | 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN |
| Hardness Rating | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Features Provided | FINISHED HEAD |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 10P STYLE AND 5 GRADE |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 120000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.062 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| NASM51095-386 | 3/2 Design control — primary reference U.S. Government activity |
| MS51095-368 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-113-9731 is a Bolt,machine, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-113-9731: Surface Finish: 63.0 MICROINCHES THREADS; Head Height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN; Fastener Length: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.