The Bolt,shear, cataloged under National Stock Number 5306-01-102-2688, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-102-2688 |
| Primary Part Number | AIC260E-4-34 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN |
| Head Height | 0.244 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN |
| Fastener Length | 2.641 INCHES MINIMUM AND 2.671 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837 TYPE 2 CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN |
| Thread Length | 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN |
| Hardness Rating | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DOUBLE HEXAGON EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN |
| Width Between Flats | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OR NICKEL AND CADMIUM OVERALL |
| Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AIC260E-4-34 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| C305-4-34 | Leonardo Spa Helicopters Division - Production Site (ITA) |
| C305-4-34 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| C305-4-34 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| VS2005-4-34 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| EWB26-4-34 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| VS2005-4-34 | 5/9 Secondary reference U.S. Government activity |
| C305-4-34 | 5/2 Secondary reference U.S. Government activity |
| EWB26-4-34 | 3/2 Design control — primary reference U.S. Government activity |
| C305-4-34 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5306-01-102-2688 is a Bolt,shear, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-102-2688 has 5 manufacturer part numbers on file: AIC260E-4-34 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), C305-4-34 (Leonardo Spa Helicopters Division - Production Site), C305-4-34 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), C305-4-34 (Sps Technologies, Llc Dba PB Fasteners), VS2005-4-34 (Howmet Global Fastening Systems Inc).
Key specifications for AIC260E-4-34: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN; Head Height: 0.244 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN; Fastener Length: 2.641 INCHES MINIMUM AND 2.671 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.