PartsTable TECHNICAL DATA SHEET
NSN 5306-01-092-0215Government record, cited

Bolt, Shear5306-01-092-0215

NSN 5306-01-092-0215 · NIIN 010920215
FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5306-01-092-0215 · 5306010920215 · NIIN 010920215 · 01-092-0215 · FSC 5306 Bolts · MS14157-10034 · MS14157-10034
Nearby stock numbers  ·
Features
  • Bolt,shear — FSC 5306
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Extended Washer Thickness: 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
  • Head Height: 0.419 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
  • Fastener Length: 3.175 INCHES MINIMUM AND 3.205 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 1 OR CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Surface Treatment Document and Classification: TT-E-489 NO. 17875 FED SPEC SINGLE TREATMENT RESPONSE TOP OF HEAD
Identification
  • NSN: 5306-01-092-0215
  • NIIN: 010920215
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
General Description

The Bolt,shear, cataloged under National Stock Number 5306-01-092-0215, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-01-092-0215
Item NameBolt,shear
FSC / FSG5306 / 53 — Bolts
StatusACTIVE
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Extended Washer Thickness0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
Head Height0.419 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
Fastener Length3.175 INCHES MINIMUM AND 3.205 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 1 OR CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Surface Treatment Document and ClassificationTT-E-489 NO. 17875 FED SPEC SINGLE TREATMENT RESPONSE TOP OF HEAD
Extended Washer Diameter1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
Thread Length1.040 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN
Hardness Rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.625 INCHES IN
Head StyleSPLINE EXTENDED WASHER
Thread DirectionRIGHT-HAND
Grip Length2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
Width Between Flats0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN
Grip Diameter0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Surface TreatmentPAINT TOP OF HEAD
Minimum Tensile Strength180000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch18
MaterialSTEEL COMP 8740 OR STEEL COMP E4340 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS14157-10034 5/9 Secondary reference
U.S. Government activity
MS14157-10034 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276
5306-00-001-1276 · Item name not on file
5306-00-001-1949
5306-00-001-1949 · Item name not on file
5306-00-001-1988
5306-00-001-1988 · Item name not on file
5306-00-001-1989
5306-00-001-1989 · Item name not on file
5306-00-001-1990
5306-00-001-1990 · Item name not on file
5306-00-001-1991
5306-00-001-1991 · Item name not on file
5306-00-001-1993
BOLT,SHEAR
5306-00-001-2017
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-01-092-0215?

NSN 5306-01-092-0215 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.

What are the specifications of 5306-01-092-0215?

Key specifications for 5306-01-092-0215: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Head Height: 0.419 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5306-01-092-0215 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com