The Bolt,machine, cataloged under National Stock Number 5306-01-084-1137, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-084-1137 |
| Primary Part Number | ST2120-060 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| Status | ACTIVE |
| Head Height | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| Fastener Length | 1.875 INCHES NOMINAL IN |
| Thread Length | 0.630 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Head Length | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| Width Between Flats | 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Askewed Head Angle | 30.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| Chamfer Angle | 45.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ST2120-060 PRIMARY | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA) |
NSN 5306-01-084-1137 is a Bolt,machine, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-084-1137 has 1 manufacturer part number on file: ST2120-060 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).
Key specifications for ST2120-060: Head Height: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN; Fastener Length: 1.875 INCHES NOMINAL IN; Thread Length: 0.630 INCHES NOMINAL IN; Nominal Thread Diameter: 0.190 INCHES IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.