The Bolt,shear, cataloged under National Stock Number 5306-01-071-8136, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-071-8136 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Head Height | 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN |
| Fastener Length | 3.891 INCHES MINIMUM AND 3.921 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Thread Length | 0.881 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | DOUBLE HEXAGON LONGITUDINAL HOLE |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 56878-LWB922 MANUFACTURERS STANDARD |
| Grip Length | 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN |
| Width Between Flats | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | NICKEL AND CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LWB-22-8H-48 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| LWB-22-8H-48 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-071-8136 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-071-8136: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Head Height: 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.