The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-059-1088, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-059-1088 |
| Primary Part Number | MS21297-08024 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| Head Height | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Fastener Length | 2.338 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN |
| Thread Length | 0.828 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS21297-08024 | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| NASM21297 | 3/2 Design control — primary reference U.S. Government activity |
| MS21297-08024 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-059-1088 is a Bolt,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-059-1088 has 1 manufacturer part number on file: MS21297-08024 (Huck International, Inc).
Key specifications for MS21297-08024: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN; Head Height: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.