The Bolt,shear, cataloged under National Stock Number 5306-01-059-0197, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-059-0197 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN |
| Head Height | 0.404 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN |
| Fastener Length | 3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN |
| Thread Length | 0.925 INCHES MINIMUM AND 0.975 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.562 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM IN |
| Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP H11 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21297H09034 | 5/9 Secondary reference U.S. Government activity |
| MS21297H09034 | 3/2 Design control — primary reference U.S. Government activity |
| 5306PL1584795 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5306-01-059-0197 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-059-0197: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN; Head Height: 0.404 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.