The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-058-8421, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-058-8421 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Head Height | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| Fastener Length | 3.361 INCHES MINIMUM AND 3.391 INCHES MAXIMUM IN |
| Extended Washer Diameter | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM IN |
| Thread Length | 1.163 INCHES MINIMUM AND 1.213 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21297H12035 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-058-8421 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-058-8421: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN; Head Height: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.