The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-054-8392, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-054-8392 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 432.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Fastener Length | 2.999 INCHES MINIMUM AND 3.029 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.364 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | UNDERCUT HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMIUM OVERALL |
| Minimum Tensile Strength | 140000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 AND STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30NF4-42 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-054-8392 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-054-8392: Surface Finish: 432.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN; Fastener Length: 2.999 INCHES MINIMUM AND 3.029 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.