The Bolt,shear, cataloged under National Stock Number 5306-01-048-1129, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies Llc Dba PB Fasteners Div PB Fasteners. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-048-1129 |
| Primary Part Number | 20-057-5-3H |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| Status | ACTIVE |
| Head Height | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN |
| Fastener Length | 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON CORNERS |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.075 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 20-057-5-3H | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| 20-057-5-3H | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| 20-057-5-3H | 5/9 Secondary reference U.S. Government activity |
| 20-057-5-3H | 5/9 Secondary reference Howmet Global Fastening Systems Inc |
| 20-057-5-3H | 3/2 Design control — primary reference U.S. Government activity |
| 20-057-5-3H | 5/2 Secondary reference U.S. Government activity |
| 20-057-5-3H | 5/2 Secondary reference U.S. Government activity |
NSN 5306-01-048-1129 is a Bolt,shear, manufactured by Sps Technologies Llc Dba PB Fasteners Div PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-048-1129 has 2 manufacturer part numbers on file: 20-057-5-3H (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), 20-057-5-3H (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
Key specifications for 20-057-5-3H: Head Height: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN; Fastener Length: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.