The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-046-3261, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-046-3261 |
| Primary Part Number | ST3M735-4-24 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Fastener Length | 1.918 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.282 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | UNDERCUT HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.500 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.818 INCHES MINIMUM AND 1.848 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ST3M735-4-24 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| 121673-4-24 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| 121673-4-24 | 3/2 Design control — primary reference U.S. Government activity |
| ST3M735-4-24 | 3/2 Design control — primary reference U.S. Government activity |
| ST3M735-4-24 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
NSN 5306-01-046-3261 is a Bolt,close Tolerance, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-046-3261 has 2 manufacturer part numbers on file: ST3M735-4-24 (Sps Technologies, Llc Dba PB Fasteners), 121673-4-24 (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for ST3M735-4-24: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 1.918 INCHES MINIMUM AND 1.938 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.