The Bolt,internal Wrenching, cataloged under National Stock Number 5306-01-040-9891, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-040-9891 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN |
| Head Height | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-13924 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.875 INCHES MINIMUM IN |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Surface Treatment | OXIDE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 155000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNRF |
| Head Diameter | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1351-3-24 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-040-9891 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-040-9891: Width Across Flats: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN; Head Height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-13924 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.