The Bolt,shear, cataloged under National Stock Number 5306-01-036-9127, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-036-9127 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Head Height | 0.640 INCHES NOMINAL IN |
| Fastener Length | 2.790 INCHES NOMINAL IN |
| Thread Length | 1.280 INCHES MINIMUM AND 1.448 INCHES MAXIMUM IN |
| Material Document and Classification | A-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 1.375 INCHES IN |
| Head Style | CROWNED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.342 INCHES NOMINAL IN |
| Width Between Flats | 1.977 INCHES MINIMUM AND 1.990 INCHES MAXIMUM IN |
| Grip Diameter | 1.3725 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM GRIP |
| Surface Treatment | CADMIUM BEARING SURFACE OF HEAD |
| Surface Treatment | CHROMATE TOP OF HEAD |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 12 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 69-59903-7 | 3/2 Design control — primary reference U.S. Government activity |
| 69-78670-3 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-036-9127 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-036-9127: Surface Finish: 32.0 MICROINCHES GRIP; Head Height: 0.640 INCHES NOMINAL IN; Fastener Length: 2.790 INCHES NOMINAL IN; Thread Length: 1.280 INCHES MINIMUM AND 1.448 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.