The Bolt,square Neck, cataloged under National Stock Number 5306-00-952-0964, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-952-0964 |
| Item Name | Bolt,square Neck |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Neck Length | 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| Head Height | 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| Fastener Length | 2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.786 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | BUTTON |
| Thread Direction | RIGHT-HAND |
| Neck Width | 0.741 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR ZINC OVERALL |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 10 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 1.469 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35751-183 | 5/9 Secondary reference U.S. Government activity |
| MS35751-183 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-952-0964 is a Bolt,square Neck, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-952-0964: Neck Length: 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN; Head Height: 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN; Fastener Length: 2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.