PartsTable TECHNICAL DATA SHEET
NSN 5306-00-928-2360Government record, cited

Bolt, Close Tolerance5306-00-928-2360

NSN 5306-00-928-2360 · NIIN 009282360
FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5306-00-928-2360 · 5306009282360 · NIIN 009282360 · 00-928-2360 · FSC 5306 Bolts · AN176H7A · NASM6812 · CIPRD-AN176H7A
Nearby stock numbers  ·
Features
  • Bolt,close Tolerance — FSC 5306
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Head Height: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
  • Fastener Length: 0.937 INCHES MINIMUM AND 0.984 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.609 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
  • Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5306-00-928-2360
  • NIIN: 009282360
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
General Description

The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-928-2360, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-928-2360
Item NameBolt,close Tolerance
FSC / FSG5306 / 53 — Bolts
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
Fastener Length0.937 INCHES MINIMUM AND 0.984 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.609 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
Hardness Rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Hole Configuration StyleHEXAGON FLATS
Nominal Thread Diameter0.375 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Grip Length0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
Width Between Flats0.553 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
Grip Diameter0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
Hole Quantity1
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.070 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
AN176H7A 2/2 Government specification standardization
U.S. Government activity
NASM6812 5/1 Secondary reference
U.S. Government activity
CIPRD-AN176H7A 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia

Frequently Asked Questions

What is NSN 5306-00-928-2360?

NSN 5306-00-928-2360 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.

What are the specifications of 5306-00-928-2360?

Key specifications for 5306-00-928-2360: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN; Fastener Length: 0.937 INCHES MINIMUM AND 0.984 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-928-2360 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com