The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-834-3033, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-834-3033 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| Fastener Length | 1.531 INCHES NOMINAL IN |
| Thread Length | 0.469 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES NOMINAL FIRST HOLE IN |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.062 INCHES NOMINAL IN |
| Width Between Flats | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| Grip Diameter | 0.4362 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 431 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.374 INCHES NOMINAL FIRST HOLE IN |
| Hole Type | DRILLED |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN174CH14 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-00-834-3033 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-834-3033: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN; Fastener Length: 1.531 INCHES NOMINAL IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.