PartsTable TECHNICAL DATA SHEET
NSN 5306-00-725-8209Government record, cited

Bolt, Shear5306-00-725-8209

NSN 5306-00-725-8209 · NIIN 007258209 · Part number NAS1114-40
Eriks Southwest Inc Dba Montclair Enterprises · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 30889
Government record, cited
NSN 5306-00-725-8209 — this item is cataloged by the U.S. Government under National Stock Number 5306-00-725-8209. Manufacturer of record part number: NAS1114-40.
Also searched as  5306-00-725-8209 · 5306007258209 · NIIN 007258209 · 00-725-8209 · FSC 5306 Bolts · CAGE 30889 · NAS1114-40
Nearby stock numbers  ·
Features
  • Bolt,shear — FSC 5306
  • Head Height: 0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
  • Fastener Length: 3.137 INCHES MINIMUM AND 3.167 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.627 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.875 INCHES IN
Identification
  • NSN: 5306-00-725-8209
  • NIIN: 007258209
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: NAS1114-40
  • Manufacturer: Eriks Southwest Inc Dba Montclair Enterprises
General Description

The Bolt,shear, cataloged under National Stock Number 5306-00-725-8209, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Eriks Southwest Inc Dba Montclair Enterprises. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-725-8209
Primary Part NumberNAS1114-40
Item NameBolt,shear
FSC / FSG5306 / 53 — Bolts
ManufacturerEriks Southwest Inc Dba Montclair Enterprises
StatusACTIVE
Head Height0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
Fastener Length3.137 INCHES MINIMUM AND 3.167 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.627 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.875 INCHES IN
Head StyleDISHED HEXAGON
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1114 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length2.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM IN
Width Between Flats1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN
Grip Diameter0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch14
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
NAS1114-40 Nor-Cal Supply Co (USA)
NAS1114-40 PRIMARY Eriks Southwest Inc Dba Montclair Enterprises (USA)
NAS1114-40 PRIMARY Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN)
NAS1114-40 Accurate Precision Fastener Corp. Div Accurate Precision Fasteners Corp (USA)
NAS1114-40 PRIMARY Hi-Shear Corporation (USA)
NAS1114-40 PRIMARY Apcom Inc (USA)
Reference documents
ReferenceMeaning
NAS1114-40 5/9 Secondary reference
Collins Engineering Corp
NAS1114-40 3/2 Design control — primary reference
U.S. Government activity
NAS1114-40 5/9 Secondary reference
Lawrence Engineering and Supply Inc
NAS1114-40 3/1 Design control — primary reference
U.S. Government activity
NAS1114-40 5/9 Secondary reference
U.S. Government activity
NAS1114-40 5/9 Secondary reference
Air Industries Co Inc
NAS1114-40 5/9 Secondary reference
F and C Sales Inc
NAS1114-40 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-004-7044
BOLT,INTERNALLY RELIEVED BODY
5306-00-007-6129
5306-00-007-6129 · Item name not on file
5306-00-008-7899
5306-00-008-7899 · Item name not on file
5306-00-009-4739
5306-00-009-4739 · Item name not on file
5306-00-118-7332
BOLT,MACHINE
5306-00-151-1777
BOLT,MACHINE
5306-00-255-4507
BOLT,EYE
5306-01-101-2459
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-00-725-8209?

NSN 5306-00-725-8209 is a Bolt,shear, manufactured by Eriks Southwest Inc Dba Montclair Enterprises, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-00-725-8209?

NSN 5306-00-725-8209 has 6 manufacturer part numbers on file: NAS1114-40 (Nor-Cal Supply Co), NAS1114-40 (Eriks Southwest Inc Dba Montclair Enterprises), NAS1114-40 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), NAS1114-40 (Accurate Precision Fastener Corp. Div Accurate Precision Fasteners Corp), NAS1114-40 (Hi-Shear Corporation) and 1 more.

What are the specifications of NAS1114-40?

Key specifications for NAS1114-40: Head Height: 0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN; Fastener Length: 3.137 INCHES MINIMUM AND 3.167 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.627 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-725-8209 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com