The Bolt,shear, cataloged under National Stock Number 5306-00-607-1143, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies Llc Dba PB Fasteners Div PB Fasteners. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-607-1143 |
| Primary Part Number | PBF1479-5-D31 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Head Height | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN |
| Fastener Length | 2.272 INCHES MINIMUM AND 2.319 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.324 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | DOUBLE HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.144 INCHES MINIMUM AND 2.196 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PBF1479-5-D31 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| 92147-5-D31 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| VCD0020-5-D31 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| Reference | Meaning |
|---|---|
| GB511B5D31 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
| BM17020-5-13 | 5/9 Secondary reference U.S. Government activity |
| PBF10785-D31 | 5/9 Secondary reference Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| GB511GG5-D31 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| VS3071-5F31 | 5/9 Secondary reference U.S. Government activity |
| AIC51685D31 | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| BM17020-5-13 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| VEPS132121-5F31 | 5/9 Secondary reference Valley-Todeco, Inc. Dba Arconic Fastening Systems |
| EWSB22D31 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| EWSB22D31 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-607-1143 is a Bolt,shear, manufactured by Sps Technologies Llc Dba PB Fasteners Div PB Fasteners, classified under FSC 5306, Bolts. Status: active.
NSN 5306-00-607-1143 has 3 manufacturer part numbers on file: PBF1479-5-D31 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), 92147-5-D31 (Sps Technologies, Llc Dba PB Fasteners), VCD0020-5-D31 (Valley-Todeco, Inc. Dba Arconic Fastening Systems).
Key specifications for PBF1479-5-D31: Surface Finish: 32.0 MICROINCHES GRIP; Head Height: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN; Fastener Length: 2.272 INCHES MINIMUM AND 2.319 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS-QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.