The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-606-9142, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-606-9142 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Fastener Length | 1.328 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN |
| Thread Length | 0.500 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Width Between Flats | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 431 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN175C12A | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-00-606-9142 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-606-9142: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Fastener Length: 1.328 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.