The Bolt,machine, cataloged under National Stock Number 5306-00-550-2431, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-550-2431 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Fastener Length | 2.891 INCHES NOMINAL IN |
| Thread Length | 0.953 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.141 INCHES NOMINAL FIRST HOLE IN |
| Material Document and Classification | MIL-S-18732 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Features Provided | FINISHED HEAD |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.937 INCHES NOMINAL IN |
| Width Between Flats | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Yield Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 431 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.672 INCHES NOMINAL FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN10C26 | 5/9 Secondary reference U.S. Government activity |
| NASM10 | 3/1 Design control — primary reference U.S. Government activity |
| AN10C26 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-550-2431 is a Bolt,machine, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-550-2431: Head Height: 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN; Fastener Length: 2.891 INCHES NOMINAL IN; Thread Length: 0.953 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.141 INCHES NOMINAL FIRST HOLE IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.